top of page
logo_vector_2017 09 12.jpg
WeChat Image_20200208214909.jpg

Laboratory Oven, Furnace

We offer laboratory oven and furnace made in Europe. Please contact us to get a quote.

Laboratory Oven

NORECS represents various types of ovens for science, research and manufacturing,

such as tube ovens, chamber ovens (muffle ovens) and larger ovens. These products

are good quality at low price.

We have solid expertise in stoves and regulators, and can give customers good advice

on oven selection and good follow-up, in addition to competitive prices and short

delivery time.

We offer design service for your furnace and programs to control it. For example, by

working together with the engineers from our supplier, we have developed models that

not only control the furnace by its own thermocouple, but also offer the option to control

it by the thermocouple in the measurement cell, in order to obtain the exact desired and

stable temperature of the sample, while the furnace's own thermocouple can also control

the safety of overheating. 

Furnaces and heating mantles for ProboStat

  • Requirements

Suitable furnace for ProboStat high temperature sample holder is tubular type with inner

diameter 40 to 50 mm. The furnace should preferentially be vertically mounted, but

horizontal operation is possible in some cases. A total furnace length is typically

50-80 cm, with heated length 30 - 45 cm. An ordinary tubular furnace should have at

least 80 cm of space underneath to enable the cell to be inserted into the furnace from



We sell several models from several manufacturers. While filling the enquiry form, mark

that you require a furnace and we will automatically select and quote the best model for

your application.


  • Temperature control and furnace types from NORECSNORECS

For the PID controller of the furnace to decide how much power to apply to the furnace

for it to reach and maintain desired temperature it needs feedback from the furnace. On

commercial, standard furnaces this is normally provided as an internal furnace

thermocouple. This is safe and uncomplicated setup with quick settling time. However,

on this setup the sample temperature is not exactly the same as the furnace temperature. The user needs to measure temperature at the sample with a ProboStat thermocouple.


It is usually better and more convenient to control the furnace temperature directly with thermocouple at the sample inside ProboStat cells, since the temperature will be exactly what was desired and constant. This type of furnaces are convenient and useful especially when sample sealing is required (fuel cell tests, gas permeation, etc.) since the sealing process requires exact and reliable feedback of temperature at the sample. For uncompromised safety this type of furnace needs an additional independent over temperature protection system. Naturally, this type as a more complicated equipment has somewhat higher price.

  • Options for furnaces   

The standard type furnaces are equipped with 3216cc PID controller. This is the simple type of controller that cannot do multi-step temperature programs, called segments. Furnace temperature program can still be executed with Omega or Omega Temp software, or more complicated PID controller can be fitted on request.


The default data protocol for our furnaces is RS232 Modbus.


  • Heating mantles   

We can deliver a custom tubular heating mantle from Glas-Col (US) suitable for

temperatures more moderate than usually obtained with regular furnaces.


A typical model is of ca. 30 cm length and covers temperatures from ambient up

to 450 or 650°C. Power supply is by standard 110 or 220 V AC, regulated by an

integrated type K thermocouple.


WeChat Image_20200208214819.jpg
bottom of page