Furnishment for ProboStat cells

​

The ProboStat™ high temperature measurement cell can be furnished

with a wide range of parts depending on the method and conditions.

All parts are detachable and replaceable, and can be bought from us

or manufactured by the user according to instructions and measures

contained in the manual. The example packages contain typical sele

-ctions of these parts, but other combinations are of course possible.

 

The options, furnishment and parts comprise:

• Outer enclosing tubes

     Alumina, quartz, Steel

• Sample support tubes (alumina standard)

     Disk samples (tube diameters 10-24 mm)
     Bar samples
     Special versions (liquid cell, shielded tube, crucible holder, YSZ, other materials, etc.)

• Electrode contacts and thermocouples (alumina and Pt standard)

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• GP# are used for replaceable electrode wraps (4-point bar samples) or GP2N electrode contacts

• H# make direct contact to electrodes on disks or end electrodes on bars

• GR# are used as reference electrodes or guard rings on disk samples

• IN2 is used to make contact to the lower electrode on a disk sample from inside the support tube, thus allowing the use of a reference or guard electrode around it, or sealing the disk to the support for concentration cell, fuel cell, or other electrochemical cell tests.

• VDP2 are used pairwise for van der Pauw measurements.

• TC's are thermocouples for various uses.

​

• Spring loads

     20 mm and 24 mm versions for samples of said or smaller diameter.
     Replacements and back-up sets
     Springs (soft and hard)

​

• Gas tubes

     Straight, alumina
     Bent, quartz
     Silicone hose for in-chamber connections

​

• Small parts

     Gold or silver ring gaskets, alumina thermocouple caps, alumina sample support plates, alumina spacer rings, spares

​

• External connections

     Swagelok quick connect stems for gases in and out

     BNC coaxial cables for impedance spectrometers etc.
     Thermocouple contacts
    Cooling water

 

Fill in the enquiry form if you want us to suggest a range of furnishment parts.

​

​

​

​

​

​

​

​

​

​

​

​

 

 

 

​

 

 

 

 

 

 

 

 

 

 

 

 

 

 

       GP＃用于可更换的电极套（4点条状样品）或GP2N电极触点

      H＃直接接触磁盘上的电极或条状样品的末端电极
      GR＃用作圆盘样品的参考电极或保护环

     IN2用于从支撑管内部接触磁盘样品上的下端电极，从而允许在其周围使用参比电极或保护电极，或将盘状样品密封到支撑管上用于浓缩电池，燃料电池或其他电化学电池的实验。           
      VDP2成对使用，用于van der Pauw测量。

      TC是用于各种用途的热电偶。

      弹簧：

      20mm和24mm版本用于所述或更小直径的样品
      替换品及备用件
      弹簧（软，硬）

      输气管：

      直管，氧化铝

      弯管，石英

      硅胶软管，用于装置腔内链接

      小零件：
      金或银质环形垫圈，氧化铝热电偶盖，氧化铝样品支撑板，氧化铝垫片环，备件
      外部连接：
      Swagelok快速连接阀杆，用于进出气体
      用于阻抗谱仪等的BNC同轴电缆
      热电偶触点
      冷却水

 

      如果您希望获得我们关于一系列装配零件的建议，请填写问询表。

​

Furnishment for ProboStat cells